This is one of the latest inflatable coverings. The research in to this kind of tent began in 2002 and by the following year our technical department had already developed the technology that would be applied in our first inflatable igloos. Shortly after, during the same year, the production of the 4 and 6 m. diameter units began and from these first units the product has continued to develop, reaching the scale of the large units currently available.
We call them new generation because, unlike the other coverings (Spider, Hangar and Nomad), they allow for much bigger dimensions, they notably improve stability in windy conditions and they are apt for many other uses, which were unattainable before.
The research into these inflatable coverings has been and continues to be a very thorough process. We began by selecting the most appropriate materials, keeping in mind lightness, resistance and durability. The most ideal motors for this type were then studied and then a calculation system was developed for inflatable coverings, that had never been done before and that set the standards for the most suitable manufacture and for strengthening the areas that need most reinforcement.
The structure of this type of igloo is based on a continuous wall formed by  a double layer of fabric which circulates the air injected by the turbines.
The wall should be a specific width, established by the structural calculations, that vary depending on the breadth of the covering.
It is normally used in events, above all in touring ones. They can host conventions, presentations or exhibitions, which  would otherwise require much greater and more complex preparation and logistics.
As can be seen from the photos, the igloo can be connected to other igloos of the same, bigger or smaller size and for complexes through connecting tunnels. The latest developments in this type of tent allow for the units' position to be changed in any way, thanks to the different ways of joining, researched for this purpose.

Technical data:
Size: From 4 m. exterior diameter and 2.5 m. height to 30 m exterior diameter and 12 m. height.
Material: polyester fibres coated with 330 gr/m2 PVC (opaque or translucent).
Made using: single, two needle, or triple needle sewing machine.